FD3.0-1000 1KW Wind Turbine System
Numbers of Blade |
3 pcs |
Material of Blade |
FRP Complex Resin |
Diameter of Wind Rotor |
3.0m |
Start (out-in) wind speed |
3m/s |
Working wind speed |
3-18m/s |
Rated speed |
400 rpm |
Security wind speed |
45m/s |
Wind energy ratio |
40% |
Generator |
Three phase
Permanent magnet generator |
Generator rated power |
1000w |
Max output power |
1200w |
Charging voltage |
48Vdc |
Output voltage of Inverter |
Single phase 220-240Vac/50HZ
110-130Vac /60HZ |
Stop method |
Stop by tail-vane yawing 60-900 |
Wind direction tracking method |
By tail-vane mechanical adjustment |
Speed adjustment method |
By tail-vane mechanical adjustment |
Protect method |
Intelligent control full-automatically |
Tower type |
Painting /Galvanized guyed wires tower |
Tower height & weight |
6m/ 80kgs |
Charging control |
Intelligent control full-automatically |
Inverter power supply |
Pure sine wave |
Battery Matching (for off-grid wind system) |
4pcs 12Vdc-120/150AH Lead-acid or colloid batteries |
Grid tied inverter matching
(For on-grid wind system) |
Input: 48Vdc
Output: 240Vac single phase
Recommend : SMA WB1100A (one pcs) |
Time of charging (off-grid type) |
About 18 hours |
Annual power generation |
About 2880KWH ( annual average wind speed above 5m/s ) |
Packing details |
|
Total packages |
4pkgs |
Total N.W / G.W |
190kgs / 200kgs |
Total Volume |
0.65 CBM |